Spanning-Tree Pathcost Method - Alcatel OmniStack LS 6248 User Manual

• — Indicates that the port link type is shared.
shared
Default Setting
The device derives the port link type from the duplex mode. A full-duplex port
is considered a point-to-point link and a half-duplex port is considered a
shared link.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables shared spanning-tree on Ethernet port 1/e5
Console(config)# interface ethernet 1/e15
Console(config-if)# spanning-tree link-type shared
Related Commands
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree disable
spanning-tree cost
spanning-tree port-priority
spanning-tree portfast
show spanning-tree

spanning-tree pathcost method

The
spanning-tree pathcost method
default path cost method. To return to the default configuration, use the
this command.
Syntax
spanning-tree pathcost method
no spanning-tree pathcost method
Parameters
• long — Specifies port path costs with a range of 1-200,000,000 .
• short — Specifies port path costs with a range of 1-65,535.
Spanning-Tree Commands
Global Configuration mode command sets the
{ | }
long short
4
.
form of
no
549