Dot1X Timeout Re-Authperiod - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

dot1x timeout re-authperiod

dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x timeout re-authperiod
The
dot1x timeout re-authperiod
number of seconds between re-authentication attempts. To return to the default
configuration, use the
Syntax
dot1x timeout re-authperiod
no dot1x timeout re-authperiod
Parameters
• seconds — Number of seconds between re-authentication attempts.
(Range: 300 - 4294967295)
Default Setting
Re-authentication period is 3600 seconds.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example sets the number of seconds between re-authentication
attempts, to 300.
Console(config)#
Console(config-if)#
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout quiet-period
dot1x timeout tx-period
268
Interface Configuration mode command sets the
form of this command.
no
seconds
interface ethernet
dot1x timeout re-authperiod
1/e16
300