Show Bridge Address-Table Static - Alcatel OmniStack LS 6248 User Manual

--------- --------------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
200 00:10:0D:48:37:FF
Related Commands
bridge address

show bridge address-table static

The
show bridge address-table static
statically created entries in the bridge-forwarding database.
Syntax
show bridge address-table static
port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
show bridge address-table static
Console#
Aging time is 300 sec
vlan mac address
---- -----------------
1 00:60:70:4C:73:FF
1 00:60.70.8C.73:FF
200 00:10:0D:48:37:FF
Address Table Commands
----
5/e8
5/e8
5/e9
Privileged EXEC mode command displays
[ vlan] [
vlan ethernet
port
----
1/e8
1/e8
1/e9
-------
dynamic
dynamic
static
interface |
port-channel
type
-----------------
Permanent
delete-on-timeout
delete-on-reset
4
325