Speed - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Example
The following example adds a description to Ethernet port 1/e5.
Console(config)#
Console(config-if)#
Related Commands
show interfaces description

speed

The Interface Configuration (Ethernet, port-channel) mode command
speed
configures the speed of a given Ethernet interface when not using auto-negotiation.
To restore the default configuration, use the
Syntax
{ |
speed 10 100
no speed
Parameters
• — Forces10 Mbps operation.
10
• — Forces 100 Mbps operation.
100
• — Forces 1000 Mbps operation.
1000
Default Setting
Maximum port capability
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
The
no speed
port-channel to its maximum capability.
Example
The following example configures the speed operation of Ethernet port 1/e5 to 100
Mbps operation.
Console(config)#
Console(config-if)#
Related Commands
shutdown
duplex
negotiation
flowcontrol
mdix
380
interface ethernet
description
| }
1000
command in a port-channel context returns each port in the
interface ethernet
speed 100
1/e5
"RD SW#3"
form of this command.
no
1/e5