4
Command Line Interface
Syntax
sntp client enable
no sntp client enable
Default Setting
The SNTP client is disabled on an interface.
Command Mode
Interface configuration (Ethernet, port-channel, VLAN) mode
Command Usage
Use the
sntp broadcast client enable
enable broadcast clients globally.
Use the
sntp anycast client enable
enable anycast clients globally.
Examples
The following example enables the SNTP client on Ethernet port 1/e3.
Console(config)#
Console(config-if)#
Related Commands
sntp broadcast client enable
sntp unicast client enable
The
sntp unicast client enable
device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers. To disable requesting and accepting SNTP traffic from
servers, use the
no
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Setting
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Use the
sntp server
servers.
358
interface ethernet
sntp client enable
Global Configuration mode command enables the
form of this command.
Global Configuration mode command to define SNTP
Global Configuration mode command to
Global Configuration mode command to
1/e3