Gvrp Enable (Interface) - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables GVRP globally on the device.
Console(config)#
Related Commands

gvrp enable (Interface)

gvrp enable (Interface)
The
gvrp enable
enables GVRP on an interface. To disable GVRP on an interface, use the
this command.
Syntax
gvrp enable
no gvrp enable
Default Setting
GVRP is disabled on all interfaces.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
An access port does not dynamically join a VLAN because it is always a
member in only one VLAN.
Membership in an untagged VLAN is propagated in the same way as in a
tagged VLAN. That is, the PVID is manually defined as the untagged VLAN
VID.
Example
The following example enables GVRP on Ethernet port 1/e6.
Console(config)#
Console(config-if)#
Related Commands
gvrp enable (Global)
garp timer
400
gvrp enable
Interface Configuration (Ethernet, port-channel) mode command
interface ethernet
gvrp enable
1/e6
form of
no