Show Dot1X - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Syntax
dot1x timeout server-timeout
no dot1x timeout server-timeout
Parameters
• seconds — Time in seconds that the device waits for a response from the
authentication server. (Range: 1-65535 seconds)
Default Configuration
The timeout period is 30 seconds.
Command Mode
Interface configuration (Ethernet) mode
Command Usage
The actual timeout can be determined by comparing the
server-timeout
value with the
values.
Example
The following example sets the time for the retransmission of packets to the
authentication server to 3600 seconds.
Console(config-if)#
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout

show dot1x

show dot1x users
show dot1x
The Privileged EXEC mode command displays the 802.1X status of the
show dot1x
device or specified interface.
Syntax
show dot1x
274
seconds
value and the result of multiplying the
radius-server timeout
dot1x timeout server-timeout
[ ethernet interface]
radius-server retransmit
value and selecting the lower of the two
dot1x timeout
3600