Map Mac Macs-Group; Switchport General Map Macs-Group Vlan - Alcatel OmniStack LS 6248 User Manual

Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan
switchport trunk native vlan
switchport general allowed vlan
switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
show interfaces switchport
switchport access multicast-tv vlan

map mac macs-group

The map mac macs-group VLAN Configuration mode command maps a MAC
address or range of MAC addresses to a group of MAC addresses. To delete the
map, use the no form of this command.
Syntax
map mac mac-address {prefix-mask | host} macs-group group
no map mac mac-address {prefix-mask | host}
Parameters
• mac-address — Specifies the MAC address to be entered to the group.
• prefix-mask — Mask bits. The format is "/n", where n is an integer number
that specifies the number of 1's in the mask.
• host — All 1's mask.
• group — Indicates the group number. (Range: 1-2147483647)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode
User Guidelines
There are no user guidelines for this command.

switchport general map macs-group vlan

The
switchport general map macs-group vlan
a mac-based classification rule. Use the
classification.
interface configuration command sets
form of this command to delete a
no
4
VLAN Commands
677