Tacacs-Server Timeout - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Examples
The following example sets the authentication encryption key.
Console(config)#
Related Commands
tacacs-server host

tacacs-server timeout

tacacs-server source-ip
show tacacs
tacacs-server timeout
The
tacacs-server timeout
during which the device waits for a TACACS+ server to reply. To return to the default
configuration, use the
Syntax
tacacs-server timeout
no tacacs-server timeout
Parameters
• timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
Default Setting
5 seconds
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Examples
The following example sets the timeout value to 30.
Console(config)#
Related Commands
tacacs-server host
tacacs-server key
624
tacacs-server key
Global Configuration mode command sets the interval
no form of this command.
timeout
tacacs-server timeout
alcatel-s
30