Spanning-Tree Cost - Alcatel OmniStack LS 6248 User Manual

Syntax
spanning-tree disable
no spanning-tree disable
Default Setting
Spanning tree is enabled on all ports.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example disables spanning-tree on Ethernet port 1/e5.
Console(config)# interface ethernet 1/e5
Console(config-if)# spanning-tree disable
Related Commands
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority

spanning-tree cost

spanning-tree port-priority
spanning-tree portfast
spanning-tree link-type
show spanning-tree
spanning-tree cost
The
spanning-tree cost
spanning tree path cost for a port. To return to the default configuration, use the
form of this command.
Syntax
spanning-tree cost
no spanning-tree cost
Parameters
• cost — Path cost of the port (Range: 1 - 200,000,000)
Interface Configuration mode command configures the
cost
Spanning-Tree Commands
4
no
545