Snmp-Server Host - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
no snmp-server filter
Parameters
• filter-name — Specifies the label for the filter record that is being updated
or created. The name is used to reference the record.
(Range: 1-30 characters)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as 1.3.6.2.4, or a word, such as system.
Replace a single subidentifier with the asterisk (*) wildcard to specify a
subtree family; for example, 1.3.*.4.
•
included
•
excluded
Default Setting
No filter entry exists.
Command Mode
Global Configuration mode
Command Usage
This command can be entered multiple times for the same filter record. Later
lines take precedence when an object identifier is included in two or more
lines.
Example
The following example creates a filter that includes all objects in the MIB-II system
group except for sysServices (System 7) and all objects for interface 1 in the MIB-II
interfaces group.
Console(config)#
Console(config)#
Console(config)#
Related Commands
show snmp filters

snmp-server host

The
snmp-server host
of Simple Network Management Protocol Version 1 or Version 2 notifications. To
remove the specified host, use the
Syntax
snmp-server host {
[1 | 2] [udp-port
no snmp-server host {
526
filter-name [oid-tree]
— Indicates that the filter type is included.
— Indicates that the filter type is excluded.
snmp-server filter
snmp-server filter
snmp-server filter
Global Configuration mode command specifies the recipient
no
ip-address hostname
|
port filtername
] [filter
ip-address
filter-name system
filter-name system.7
filter-name ifEntry.*.1
form of this command.
community-string
}
seconds
] [timeout
hostname
| } [traps | informs]
included
excluded
included
[traps | informs]
retries
] [retries ]