Line Commands - Alcatel OmniStack LS 6248 User Manual

Line Commands

Command Function
line Identifies a specific line for configuration and enters the Line
Configuration command mode.
speed Sets the line baud rate. To return to the default configuration, use
the no form of the command.
autobaud Sets the line for automatic baud rate detection (autobaud). To
disable automatic baud rate detection, use the no form of the
command.
exec-timeout Sets the interval that the system waits until user input is detected.
To return to the default configuration, use the no form of this
command.
history Enables the command history function. To disable the command
history function, use the no form of this command.
history size Configures the command history buffer size for a particular line. To
reset the command history buffer size to the default configuration,
use the no form of this command.
terminal history Enables the command history function for the current terminal
session. To disable the command history function, use the no
form of this command.
terminal history size Configures the command history buffer size for the current
terminal session. To reset the command history buffer size to the
default setting, use the no form of this command.
show line Displays line parameters.
line
The Global Configuration mode command identifies a specific line for
line
configuration and enters the Line Configuration command mode.
Syntax
line { console |
Parameters
• console — Console terminal line.
• — Virtual terminal for remote console access (Telnet).
telnet
• — Virtual terminal for secured remote console access (SSH).
ssh
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Table 4-18. Line Commands
telnet | ssh }
4
Line Commands
Mode Page
GC 4-437
LC 4-438
LC 4-439
LC 4-439
LC 4-440
LC 4-440
UE 4-441
UE 4-442
UE 4-443
437