User Interface Commands - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

User Interface Commands

Command
do
enable
disable
login
configure
exit (Configuration)
exit
end
help
terminal datadump
show history
show privilege
do
To execute an EXEC-level command from the Global Configuration mode or any
configuration submode, use the do command in any configuration mode.
Syntax
do command
Parameters
•
command
Default Setting
This command has no default configuration.
Command Mode
All configuration modes
652
Table 4-35. User Interface Commands
Function
To execute an EXEC-level command from the Global
Configuration mode or any configuration submode.
Enters the Privileged EXEC mode.
Returns to the User EXEC mode.
Changes a login username.
Enters the Global Configuration mode.t
Exits any configuration mode to the next highest mode in the CLI
mode hierarchy.
Closes an active terminal session by logging off the device.
Ends the current configuration session and returns to the
Privileged EXEC mode.
Displays a brief description of the help system.
Enables dumping all the output of a show command without
prompting. To disable dumping, use the no form of this command.
Lists the commands entered in the current session.
Displays the current privilege level.
— The EXEC command to be executed.
Mode Page
All 4-652
Configur
ation
Modes
UE 4-653
PE 4-654
UE 4-654
PE 4-655
All 4-655
Configur
ation
Modes
PE,UE 4-656
All 4-657
Configur
ation
Modes
All 4-657
Comma
nd
Modes
UE 4-658
UE 4-659
PE,UE 4-659