Port Security Max - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Syntax
port security mode
no port security mode
Parameters
• lock — Saves the current dynamic MAC addresses associated with the port
and disables learning, relearning and aging.
• mac-addresses — Deletes the current dynamic MAC addresses
associated with the port and learns up to the maximum number addresses
allowed on the port. Relearning and aging are enabled.
Default Setting
This setting is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
In this example, port security mode is set to dynamic for Ethernet interface 1/e7.
Console(config)#
Console(config-if)#
Related Commands

port security max

show ports security
port security max
The
port security max
command configures the maximum number of addresses that can be learned on the
port while the port is in port security mode. To return to the default configuration, use
the form of this command.
no
Syntax
port security max
no port security max
Parameters
• max-addr— Maximum number of addresses that can be learned by the
port. (Range: 1-128)
Default Setting
The default is 1 address.
322
{ | mac-addresses}
lock
interface ethernet
port security mac-addresses
Interface Configuration (Ethernet, port-channel) mode
max-addr
1/e7