Boot System - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
flash:
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
*.sys and *.prv files cannot be renamed.
Example
The following example renames the configuration file.
Console# rename configuration.bak m-config.bak

boot system

The
boot system
the device loads at startup.
Syntax
boot system
Parameters
• unit — Specifies the unit number.
•
image-1
• image-2
Default Setting
If the unit number is unspecified, the default setting is the master unit number.
Command Mode
Privileged EXEC mode
Command Usage
Use the
show bootvar
Example
The following example loads system image 1 at device startup.
boot system image-1
Console#
Related Commands
show bootvar
372
Source or destination URL for flash memory.
It's the default in case a URL is specified without a prefix
Privileged EXEC mode command specifies the system image that
[ unit] {
unit image-1
— Specifies image 1 as the system startup image.
— Specifies image 2 as the system startup image.
command to find out which image is the active image.
| }
image-2