Defining Authentication Hosts; Figure 3-74. Multiple Hosts Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch
CLI – The following is an example of the Multiple Hosts CLI commands:
Console(config-if)#
4-282
Console(config-if)#
4-283

Defining Authentication Hosts

The Authentication Host Page contains a list of authenticated users.
Command Attributes
• User Name — Lists the supplicants that were authenticated, and are permitted on
each port.
• Port — Displays the port number.
• Session Time — Displays the amount of time (in seconds) the supplicant was
logged on the port.
• Authentication Method — Displays the method by which the last session was
authenticated. The possible field values are:
• Remote — 802.1x authentication is not used on this port (port is
forced-authorized).
• None — The supplicant was not authenticated.
• RADIUS — The supplicant was authenticated by a RADIUS server.
• MAC Address — Displays the supplicant MAC address.
Web – Click Security, 802.1x, Authentication Host. Define the fields and click Apply.
162

Figure 3-74. Multiple Hosts Page

dot1x multiple-hosts
dot1x single-host-violation forward trap
100