Triple Play Commands
Command
Function
switchport customer
Sets the port's VLAN when the interface is in customer mode
vlan
switchport customer
Enables the receiving of Multicast transmissions from a VLAN
multicast-tv vlan
that is not the Customer port's VLAN, while keeping the L2
segregation with subscribers on different Customer port VLANs.
ip igmp snooping
Maps CPE VLANs to multicast-TV VLANs.
map cpe vlan
show ip igmp
Displays the CPE VLANs to Multicast TV VLANs mappings.
snooping cpe vlans
switchport customer vlan
The switchport customer vlan Interface Configuration (Ethernet, port-channel)
mode command sets the port's VLAN when the interface is in customer mode. To
restore the default configuration, use the no form of this command.
Syntax
switchport customer vlan vlan-id
no switchport customer vlan
Parameters
• vlan-id — VLAN ID of the customer.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
switchport customer multicast-tv vlan
The
switchport customer multicast-tv vlan
enables the receiving of Multicast transmissions from a VLAN that is not the
Customer port's VLAN, while keeping the L2 segregation with subscribers on
different Customer port VLANs.
Table 4-33. Triple Play Commands
interface configuration command
Triple Play Commands
Mode
Interface
Configurati
on
Interface
Configurati
on
Global
Configurati
on
Privileged
EXEC
mode
4
Page
4-627
4-627
4-628
4-629
627