Alcatel OmniStack LS 6248 User Manual page 589

Syntax
show spanning-tree
port-channel-number] [
show spanning-tree
show spanning-tree mst-configuration
Parameters
• interface-number — A valid Ethernet port.
• port-channel-number — A valid port channel number.
• detail — Indicates detailed information.
• — Indicates active ports only.
active
•
blockedports
•
mst-configuration
• instance-id — Specifies the ID of the spanning tree instance (The range
lower limit is 0. The upper limit is product-specific).
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays spanning-tree information.
show spanning-tree
Console#
Spanning tree enabled mode RSTP
Default port cost method: long
Root Priority
ID
Address
Path
Cost
Root
Port
Hello Time 2 sec
[ interface -number|
ethernet
instance-id]
instance
[ detail ] [ active | blockedports
— Indicates blocked ports only.
— Indicates the MST configuration identifier.
32768
00:01:42:97:e0:00
20000
1 (1/
e1)
Max Age 20
sec
Spanning-Tree Commands
port-channel
] [ instance instance-id]
Forward Delay 15 sec
4
565