Oil Level - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Table of Contents

Advertisement

CAPACITY
500 ml (17 U.S. oz)
75W 90 (API GL-5) gear oil
9. Reinstall filler plug with a NEW sealing ring.
10. Tighten filler plug to specification.
FILLER PLUG
Gasket
Tightening torque
Middle and Rear Final Drive Oil Level
Verification
1. Ensure vehicle is on a level surface.
2. Clean filler plug area.
3. Remove filler plug.
sfvmr2014-010-003
MIDDLE DRIVE, LH SIDE OF VEHICLE
1. Filler plug
vmr2015-107
Subsection 03 (PERIODIC MAINTENANCE PROCEDURES (650))
RECOMMENDED OIL
XPS SYNTHETIC
GEAR OIL (75W 90)
(P/N 293 600 043) or a
NEW
22.5 N•m ± 2.5 N•m
(17 lbf•ft ± 2 lbf•ft)
Section 01 MAINTENANCE
sfvmr2014-010-004
REAR FINAL DRIVE, LH SIDE OF VEHICLE
1. Filler plug
4. Verify the oil level by inserting a wire with a 90°
bend through the oil filler hole.
5. Oil level must be within the following specifica-
tion from the bottom of oil filler hole.

OIL LEVEL

Middle drive
Rear final drive
6. Reinstall filler plug with a NEW sealing ring.
FILLER PLUG
Gasket
Tightening torque
Middle and Rear Final Drive Oil
Replacement
1. Ensure vehicle is on a level surface.
2. Clean filler and drain plug areas.
3. Place a drain pan under rear final drive.
4. Unscrew filler plug.
5. Remove drain plug.
13 mm ± 5 mm
(.512 in ± .197 in)
20 mm ± 5 mm
(9/16 in ± 3/16 in)
NEW
22.5 N•m ± 2.5 N•m
(17 lbf•ft ± 2 lbf•ft)
29

Advertisement

Table of Contents
loading

Table of Contents