vmr2012-039-032_a
vmr2012-039-033_a
1. Ensure proper contact here
7. Unscrew positioning screw and remove pusher
adapter and pull out DPS unit.
8. Install Pitman arm retaining washer and nut.
Tighten nut as specified.
vmr2012-039-022_a
1. DPS
2. Pitman arm
3. Pitman arm nut and washer
TIGHTENING TORQUE
Pitman arm retaining nut
vmr2015-142
Subsection 03 (DYNAMIC POWER STEERING (DPS))
72.5 N•m ± 7.5 N•m
(53 lbf•ft ± 6 lbf•ft)
Section 07 CHASSIS
9. Carry out a steering alignment as described in
this subsection.
535