BRP Cam-am Outlander 6x6 DPS 2015 Manual page 53

vmr2012-009-025_a
SOME PARTS REMOVED FOR CLARITY
1. Disconnect the following coolant hoses
17. Remove main ground wire from engine.
vmr2012-009-014_a
TYPICAL - RH SIDE AFT CYLINDER
1. Main ground wire
18. Remove the shift rod. Refer to
section.
vmr2015-111-001_a
1. Shift rod
vmr2015-025
Section 02 ENGINE, CVT AND GEARBOX
Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
Engine Lifting
1. Install the
022)
529036022
vmr2012-009-015
TYPICAL
2. Attach hoist to engine lifting tool and pick up
some of the engine weight with the hoist.
3. Remove retaining screws from upper engine
mount.
SHIFTER sub-
vmr2012-009-016_a
TYPICAL - LH SIDE
1. Upper retaining screws
4. Remove retaining bolt from rear engine mount.
ENGINE LIFTING TOOL (P/N 529 036
on engine.
73