BRP Cam-am Outlander 6x6 DPS 2015 Manual page 58

Section 02 ENGINE, CVT AND GEARBOX
Subsection 02 (AIR INTAKE SYSTEM)
GENERAL
NOTICE
Never modify the air intake system.
Otherwise, engine performance degradation
or damage can occur. The engine is calibrated
to operate specifically with these components.
PROCEDURES
AIR FILTER
For air filter servicing, refer to
TENANCE PROCEDURES
AIR FILTER HOUSING
Air Filter Housing Removal
1. Remove front body module. Refer to
subsection.
2. Remove dashboard support retaining screws.
Pull aft pins from grommets and move support
toward front.
vmr2015-013-006_a
DASHBOARD SUPPORT REMOVAL
1. Screws to remove
3. On LH side, remove screws securing CVT air
inlet to air filter housing.
78
PERIODIC MAIN-
subsection.
BODY
vmr2012-010-002_a
TYPICAL
1. CVT air inlet screws
4. Remove ECM retaining screws.
vmr2012-010-001_a
1. ECM retaining screws
5. Remove engine harness connectors (HIC) from
air filter housing.
6. Move ECM aside.
vmr2012-009-005_a
TYPICAL
1. Engine harness connectors (HIC)
vmr2015-026