BRP Cam-am Outlander 6x6 DPS 2015 Manual page 92

WATER PUMP GEARS
Water Pump Gears Identification
vmr2012-013-009_a
1. Water pump shaft
2. Water pump gear
3. Water pump intermediate drive gear
4. Water pump intermediate shaft
5. Water pump drive gear (See BOTTOM END subsection)
Water Pump Gears Inspection
Water Pump Gear
Inspect water pump gear for wear and damage on
the snap mechanism to the needle pin. Replace if
damaged.
tmr2011-011-008_a
CRANKCASE MAG SIDE
1. Circlip
2. Water pump gear
Water Pump Intermediate Drive Gear
Check water pump intermediate drive gear for
wear or broken teeth. Replace if damaged.
vmr2015-114
Section 02 ENGINE, CVT AND GEARBOX
Subsection 05 (COOLING SYSTEM (650))
tmr2011-011-013_a
CRANKCASE PTO SIDE
1. Water pump intermediate drive gear
2. Circlip
3. Water pump intermediate shaft
4. Crankcase PTO side
Water Pump Drive Gear
BOTTOM END
See
Water Pump Gears Removal
Water Pump Gear
1. Remove circlip retaining water pump gear and
discard it.
tmr2011-011-008_a
CRANKCASE MAG SIDE
1. Circlip
2. Water pump gear
2. Remove the following parts:
– Water pump gear
– Needle pin
– Thrust washer.
subsection.
115