Maintenance Schedule - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Section 01 MAINTENANCE
Subsection 02 (PERIODIC MAINTENANCE SCHEDULE)

MAINTENANCE SCHEDULE

EVERY 1 500 KM (1,000 MI) OR 50 HOURS OF OPERATION
IN TRAIL RIDING CONDITIONS (WHICHEVER COMES FIRST)
EVERY 750 KM (500 MI) OR 25 HOURS OF OPERATION IN SEVERE RIDING CONDITIONS (DUSTY
OR MUDDY) OR CARRYING HEAVY LOADS CONDITION (WHICHEVER COMES FIRST)
Inspect and clean engine air filter. Replace as needed
Inspect and clean CVT air filter and replace as needed
Check battery connections
Inspect front differential / middle and rear final drive oil level
Lubricate front, middle and rear propeller shaft joints
Inspect tie rod end and ball joints
Lubricate front suspension arms
Inspect and lubricate rear anti-sway bar bushings
Inspect the drive shaft boots and protectors
Inspect brake pads
EVERY 3 000 KM (2,000 MI) OR 100 HOURS OF OPERATION
IN TRAIL RIDING CONDITIONS (WHICHEVER COMES FIRST)
EVERY 1 500 KM (1,000 MI) OR 50 HOURS OF OPERATION IN SEVERE RIDING CONDITIONS (DUSTY
OR MUDDY) OR CARRYING HEAVY LOADS CONDITION (WHICHEVER COMES FIRST)
Replace engine oil and filter
Inspect and adjust valve clearance
Inspect and clean muffler spark arrester
Inspect and clean throttle body
Inspect, clean and lubricate throttle cable
Replace fuel vent breather filter
Inspect CVT drive belt
Inspect, clean and lubricate CVT drive and driven pulleys (including one-way bearing)
Check gearbox oil level and condition
Inspect wheel bearings (check for abnormal play)
Inspect steering system (check for abnormal play)
Inspect and clean brake system
Replace rear and center final drive oil
Check battery condition and connections
10
vmr2015-106