BRP Cam-am Outlander 6x6 DPS 2015 Manual page 374

Section 06 DRIVE SYSTEM
Subsection 02 (MIDDLE AND REAR FINAL DRIVE)
vmr2015-139-012_a
1. Housing screws
Split middle drive housings.
NOTE: Be careful to keep track of shims on ring
gear.
vmr2015-139-004_a
Extract ring gear out of half housing.
Pinion Gear Removal
Remove and discard oil seal.
488
vmr2015-139-005
Unscrew the pinion nut. Use the
SOCKET (P/N 529 035 649)
529035649
vmr2015-139-006
NOTE: The pinion nut is left hand threaded. Un-
screw by turning clockwise.
Remove the bearing along with the pinion gear.
Be careful to keep track of shims. Discard bear-
ing.
SPANNER
.
vmr2015-139