Service Limit - BRP Cam-am Outlander 6x6 DPS 2015 Manual

vmr2006-042-012_a
1. Oil pump bore
2. Outer rotor
3. Oil pump shaft
4. Needle pin
5. Inner rotor
Check inner rotor for corrosion pin holes or other
damages. If so, replace oil pump shaft assembly.
vmr2006-042-013_a
1. Pittings on the teeth
Using a feeler gauge, measure the clearance of
inner and outer rotors as shown.
CLEARANCE OF INNER AND OUTER ROTOR

SERVICE LIMIT

vmr2015-114
Section 02 ENGINE, CVT AND GEARBOX
0.25 mm (.0098 in)
Subsection 04 (LUBRICATION SYSTEM)
A
2
vmr2006-042-014_a
1. Outer rotor
2. Inner rotor
A. 0.25 mm (.0098 in)
If clearance of inner and outer rotors exceeds the
tolerance, replace oil pump rotors. Ensure to also
check oil pump cover. If damaged, replace the
complete oil pump assembly.
If clearance between outer rotor and its bore in
crankcase exceeds the tolerance, replace the
complete oil pump rotors and/or the crankcase.
Using a depth gauge, measure the axial clearance
of the oil pump as shown.
vmr2006-042-015
OIL PUMP — MEASUREMENT "A"
A
A
1
95