BRP Cam-am Outlander 6x6 DPS 2015 Manual page 91

Section 02 ENGINE, CVT AND GEARBOX
Subsection 05 (COOLING SYSTEM (650))
tmr2011-011-014_a
1. Oil seal
2. Installer handle with oil seal pusher
Apply
DOW CORNING 111 (P/N 413 707 000)
ing lip of the oil seal.
tmr2011-011-011_b
1. Sealing lip
2. Oil seal properly installed
Apply engine oil on the water pump shaft and in-
termediate shaft.
Slide NEW water pump shaft assembly into
crankcase.
REQUIRED TOOL
SEAL PUSHER
(P/N 529 035 766)
114
mmr2009-112-028_a
WATER PUMP SHAFT ASSEMBLY
1. Surface where rotary seal is pushed by tool
NOTICE
installation. Only use a press to avoid damag-
ing the ceramic component.
on seal-
tmr2011-011-015_a
1. Water pump shaft with rotary seal
2. Water pump seal installer
NOTICE
with rotary seal must rotate freely.
Never use a hammer for rotary seal
After installation, water pump shaft
vmr2015-114