BRP Cam-am Outlander 6x6 DPS 2015 Manual page 380

Section 06 DRIVE SYSTEM
Subsection 02 (MIDDLE AND REAR FINAL DRIVE)
vmr2015-052-008_a
TYPICAL
Unscrew the pinion nut. Use the
SOCKET (P/N 529 035 649)
529035649
vmr2015-052-009_a
TYPICAL
Remove the bearing along with the pinion gear.
Be careful to keep track of shims. Discard bear-
ing.
494
SPANNER
.
vmr2015-052-010_a
TYPICAL
vmr2015-052-011_a
TYPICAL
1. O-ring
2. Ball bearing
3. Pinion gear shim
4. Pinion gear
The pinion gear and bearing can be easily removed
using the following suggested tool:
PART
Pipe: 83 mm (3-1/4 in) diameter x 127 mm
(5 in)
Threaded rod: M10 x 1.25 x 178 mm (7 in)
M10 x 1.25 nut
Flat bar
Remove and discard the needle bearing.
QTY
1
1
3
1
vmr2015-139