BRP Cam-am Outlander 6x6 DPS 2015 Manual page 289

vmr2012-028-012_a
TYPICAL
1. Starter solenoid
2. Positive (+) battery cable to disconnect
10. Remove the 2 screws that secure the front of
the battery support.
vmr2012-028-013_a
1. Battery support
2. Support retaining screws
NOTE: It is not necessary to remove the wiring
harness or other components from the battery
support.
11. Flip the battery support over towards the RH
side of the vehicle for access to the rear frame
extension.
vmr2015-130
Section 04 FUEL SYSTEM
Subsection 02 (FUEL TANK AND FUEL PUMP)
vmr2012-028-014_a
TYPICAL
1. Battery support
2. Rear frame extension
12. Remove the upper mounting bolt from both
rear shock absorbers.
sfvmr2014-010-071_a
1. Upper shock mounting bolts
13. Remove vent tube from middle drive.
sfvmr2014-010-073_a
1. Middle drive unit
2. Vent tube to remove
14. Remove fuel tank retaining screws (4).
NOTE: Note position of washers and bushings on
each screw.
397