BRP Cam-am Outlander 6x6 DPS 2015 Manual page 338

Section 05 ELECTRICAL SYSTEM
Subsection 07 (LIGHTS, GAUGE AND ACCESSORIES)
Transmission Position Display
This display will show transmission position.
vmo2012-012-029_j
1. Transmission position
DISPLAY
P
R
N
H
L
NOTE: If the letter "E" is displayed in the trans-
mission position display, it means that there is a
electrical communication error..
Fuel Level Display
Bar gauge continuously indicates the fuel level in
the fuel tank.
vmo2012-012-029_n
1. Fuel level display
450
Low fuel level Indicator Lamp
When this indicator turns ON, it indicates that
there is approximately 5 L (1.3 U.S. gal.) of fuel
left in fuel tank.
6WD Indicator Lamp
When this indicator is ON, it indicates the 6WD
system is activated.
Brake Lock Indicator Lamp
FUNCTION
Park
When this indicator is ON, it indicates the brake is
Reverse
activated for more than 15 seconds (while riding).
Neutral
High Beam Indicator Lamp
High gear
Low gear
When this indicator is ON, it indicates that high
beam is selected.
Check Engine Indicator Lamp
When this indicator is ON, it indicates an engine
fault code, look for a message at the LCD display.
Refer to
details.
Multifunction Display Modes
The available modes may be displayed by pressing
the display selector button.
NOTE: An abbreviation of the mode selected will
also be displayed in Display 3.
TROUBLESHOOTING
WARNING
Never adjust or set functions on the multi-
function gauge while riding the vehicle.
section for more
vmr2015-137