Tion System - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Section 02 ENGINE, CVT AND GEARBOX
Subsection 13 (BOTTOM END (650))
tmr2011-014-022
NOTE: During disassembly, do not damage the
sealing surfaces of the crankcase halves.
15. Pull crankshaft out of crankcase.
16. Remove the water pump intermediate shaft.
vmr2006-044-023_b
1. Water pump intermediate shaft
17. Remove engine oil strainer.
NOTE: Oil strainer removal for inspection and
cleaning is recommended. Refer to

TION SYSTEM

subsection.
238
tmr2011-014-023_a
1. Engine oil strainer
2. Retaining plate
3. Screws
Crankcase Cleaning
Clean crankcase using a part cleaner.
Dry crankcase using compressed air.
Blow low pressure filtered air through the oil sup-
ply lines.
Crankcase Inspection
Check crankcase halves for cracks or other dam-
age. Replace if damaged.
Check MAG and PTO plain bearings for scoring or
other damages.
LUBRICA-
tmr2011-014-024_a
1. Plain bearing
Measure plain bearing inside diameter and com-
pare to PTO/MAG main journal diameters of crank-
shaft, refer to
Replace if the measurements are out of specifi-
cation.
CRANKSHAFT
in this subsection.
vmr2015-120