Parts Catalog - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Section 05 ELECTRICAL SYSTEM
Subsection 02 (WIRING HARNESS AND CONNECTORS)
A
A32E2QA
A. 10 mm (3/8 in)
NOTE: Make sure not to cut wire strands while
stripping the wire.
Install the appropriate terminal on the wire ac-
cording to the requirement. Refer to appropriate

PARTS CATALOG

.
A32E2RA
INSTALLATION OF TERMINAL
Follow the instructions provided with the
ING TOOL (HEAVY GAUGE WIRE) (P/N 529 035 730)
to select the proper position of the tool.
529035730
NOTE: Different wires require different crimping
pliers settings.
426
2
A32E2SA
POSITIONING THE CRIMPING PLIERS
Step 1: Press
Step 2: Rotate
After positioning the crimping pliers, crimp the ter-
minal already installed on wire.
CRIMP-
A32E2TA
CRIMPING OF WIRE
A32E2UA
PROPERLY CRIMPED WIRE
To verify, if the wire is properly crimped, apply
some pulling force on wire and the terminal at the
same time from both directions.
1
vmr2015-132