BRP Cam-am Outlander 6x6 DPS 2015 Manual page 272

Section 04 FUEL SYSTEM
Subsection 01 (ELECTRONIC FUEL INJECTION (EFI))
vmr2006-014-060_b
1. Throttle lever
2. Cable barrel
10. Remove barrel from cable.
11. Pull out throttle cable.
12. Pull out throttle body.
Throttle Body Installation
Installation of the throttle body is the reverse of
the removal procedure. However, pay attention to
the following.
Temporarily install throttle body into position.
Properly install cable barrel to throttle cable end.
vmr2006-014-063_a
Hook cable to throttle lever.
380
vmr2006-014-064_a
Rotate throttle body into position and ensure to
index throttle body tab with boot notch.
vmr2006-014-065_a
vmr2006-014-65_a
vmr2015-129