BRP Cam-am Outlander 6x6 DPS 2015 Manual page 484

North American Models
12. Remove rivet (both sides). Refer to
RIVET REMOVAL in this subsection.
vmr2015-148-001_a
All Models
13. Remove retaining screws.
sfvmr2014-010-112_a
1. Retaining screws
14. Remove retaining nut and leave the screw in
place (both sides).
sfvmr2014-010-113_a
1. Retaining nut
vmr2015-148
15. Remove retaining screws and nuts (both
sides).
HUCK
vmr2015-148-002_a
1. Retaining screws and nuts
sfvmr2014-010-115_a
1. Retaining screws and nuts
16. Drain oil from middle drive. Refer to
ODIC MAINTENANCE PROCEDURES
section.
17. Unplug the vent hose from middle drive.
18. Remove rear propeller shaft screw from the
middle drive yoke. Refer to
SHAFT
subsection.
19. Remove middle drive retaining screws.
Section 07 CHASSIS
Subsection 09 (FRAME)
PERI-
PROPELLER
sub-
603