Section 02 ENGINE, CVT AND GEARBOX
Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
11. On RH side of engine, remove oil pressure
switch cover.
vmr2012-009-009_a
TYPICAL - RH SIDE OF ENGINE
1. Oil pressure switch cover
12. Cut locking ties and remove electrical har-
nesses from harness support.
vmr2012-009-010_a
TYPICAL - RH SIDE OF ENGINE
1. Harnesses support
13. Disconnect magneto connector from voltage
regulator rectifier.
72
vmr2012-043-013_b
TYPICAL
1. Magneto connector
14. Remove magneto harness from its location
along vehicle and gather it in a bundle near
engine.
15. Disconnect vent hose from gearbox.
vmr2012-009-012_a
TYPICAL
1. Vent hose
16. Disconnect coolant hoses as illustrated.
vmr2015-025