BRP Cam-am Outlander 6x6 DPS 2015 Manual page 86

tmr2011-011-052_a
1. Screwdrivers
NOTICE
Be careful not to damage the
crankcase while removing outer part of the
rotary seal.
5. Thoroughly remove sealing residue and burr of
rotary seal using a scraper.
NOTICE
Be careful not to damage water
pump shaft.
tmr2011-011-053_a
1. Scraper
6. Install 2 wooden screws in the seal.
vmr2015-114
Section 02 ENGINE, CVT AND GEARBOX
Subsection 05 (COOLING SYSTEM (650))
tmr2011-011-054_a
1. Wooden screws
2. Oil seal
7. Remove oil seal from crankcase by pulling
screws with pliers.
tmr2011-011-055_a
1. Pull on screws to remove seal
8. Check water pump shaft axial play.
NOTE: If axial play is not adequate, engine must
be disassembled to replace water pump shaft.
9. Clean oil seal seat.
109