BRP Cam-am Outlander 6x6 DPS 2015 Manual page 228

Section 03 ELECTRONIC MANAGEMENT SYSTEMS
Subsection 04 (DIAGNOSTIC SYSTEM AND FAULT CODES)
vbl2012-007-011_a
FAULT PAGE
1. Fault tab
2. Fault indicator light
3. Fault code state drop box
4. Fault description
5. More Details button
6. Clear Fault button
7. Clear Occurred Faults button
8. Selected fault
FAULT PAGE DESCRIPTION
ITEM
Fault tab Click tab to display the fault page
Fault When flashing, it indicates there is
indicator light active fault(s)
Fault code
Click drop box to select the type of
state drop
faults to display
box
Display specific information and
Fault
statistics related to the fault (see
nomenclature
fault nomenclature table)
To display possible causes and
More Details
service actions related to the
button
selected fault
Clear Fault To clear occurred faults one at a
button time
Clear
To clear all occurred faults in related
Occurred
ECU(s)
Faults button
When a fault is selected, additional
information pertaining to that
fault will be displayed when
Selected
clicking the "More details" button.
fault
To select a fault, click on the fault
with the mouse or use the cursor up
or down to scroll to the desired fault
362
INFORMATION
FAULT NOMENCLATURE
COLUMN
Fault code number.
When 2 stars (**) precedes the
code, detailed conditions when the
Code
fault occurred, can be displayed by
clicking the "More details" button
Display the fault state (active, occurred,
State
inactive)
Displays the module that reports the
fault code. This is the module that
detects or has received a message
of an anomaly and reports it.
Module
List of modules:
- Cluster (multifunction gauge)
- DPS (dynamic power steering)
- ECM (engine control module)
Number of times this fault
Count occurred within the driving cycle.
Value: From 0 to 255
Not to be used.
Cycle time
Value: From 0 to 255 minutes
Not to be used.
Total time
Value: From 0 to 64 255 minutes
Description Provides a short description of the fault
When reading a fault code in B.U.D.S., pay partic-
ular attention to which module reports a fault. It
is indicated in the Module column.
The Description column gives a short description
of the fault.
rmr2011-021-002_a
SOME COLUMNS REMOVED FOR CLARITY PURPOSE
1. Module that reports a fault
2. Fault description
Click on the More Details button, on the RH lower
corner, to display the "Possible Causes" and the
"Service Actions" to step further in the diagnosis.
INFORMATION
vmr2015-128