BRP Cam-am Outlander 6x6 DPS 2015 Manual page 458

Section 07 CHASSIS
Subsection 07 (BODY)
vmr2012-043-019_a
TYPICAL
1. Rear fender retaining tabs
7. Remove fuel tank cap.
8. Place a clean rag into fuel tank filler tube.
9. Remove rear body panels.
10. Remove rag and reinstall fuel tank cap.
WARNING
Fuel vapors are flammable and explosive
under certain conditions. Unless otherwise
noted, the fuel tank cap must always be in-
stalled on vehicle.
Rear Body Panels Installation
The installation is the reverse of the removal pro-
cedure.
CONSOLE
Console Removal
1. Remove seat.
2. Lift rear portion of console upwards.
vmr2012-043-020_a
LIFT REAR PORTION
576
3. Pull console rearwards.
Console Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Align console front tabs with slots, then push con-
sole forward.
vmr2012-043-021_a
SOME PARTS REMOVED FOR CLARITY
1. Console front tabs
GAUGE SUPPORT
LIGHTS, GAUGE AND ACCESSORIES
Refer to
subsection.
INNER FENDER PANELS
Inner Fender Removal and Installation
Remove the following plastic rivets from inner
fender panels.
vmr2012-043-022_a
SOME PARTS REMOVED FOR CLARITY
vmr2015-146