The installation is the reverse of the removal pro-
cedure.
SIDE PANELS
Side Panel Removal
CONSOLE
1. Remove
. See procedure in this sub-
section.
2. Remove plastic rivet securing side panel to in-
ner fender panel.
vmr2012-043-023_a
1. Plastic rivet securing side panel
3. Remove plastic rivet securing side panel to air
filter housing.
vmr2012-043-024_a
1. Plastic rivet securing side panel
4. Remove plastic rivet securing side panel to rear
fender.
vmr2015-146
Section 07 CHASSIS
Subsection 07 (BODY)
vmr2015-146-002_a
5. Lift rear portion of side panel assembly then pull
it towards outside.
vmr2012-043-026_a
LIFT REAR PORTION
Side Panel Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Align side panel front tab with slot, then push side
panel forward.
PANEL EXTENSIONS
Panel Extension Removal
1. Remove seat.
2. Remove console. Refer to
MOVAL
.
3. Remove side panel assembly including side
panel, panel extension and rear side panel ex-
tension. Refer to
SIDE PANEL REMOVAL
4. Undo tabs securing panel extension to side
panel.
CONSOLE RE-
.
577