BRP Cam-am Outlander 6x6 DPS 2015 Manual page 266

Section 04 FUEL SYSTEM
Subsection 01 (ELECTRONIC FUEL INJECTION (EFI))
– Model number
– Customer.
vmr2008-022-008
5. Remove the original ECM.
6. Install the new ECM.
7. In B.U.D.S., click the Read Data button to read
the new ECM.
vmr2006-012-100_aen
8. Select the Vehicle tab and enter the informa-
tion you recorded previously.
– Vehicle serial number
– Engine number (do not enter the "M" at the
beginning of the engine number)
– Enter model number.
– Customer name.
smr2009-030-007_a
VEHICLE TAB
374
9. Click on the following tabs:
– History
– Part Replacement
– Add Part in History.
10. Enter the old ECM serial number in the Add
Part In History window.
tmr2011-022-017_a
ADDING PART IN HISTORY
1. History tab
2. Part Replacement tab
3. Add part in history button
4. ECM selection
5. Add ECM serial number here
NOTE: The ECM serial number can be found on
the ECM sticker that also identifies the part num-
ber.
11. Click on the OK button.
12. Click on the Write Data button.
vmr2006-012-100_ben
13. Perform the Closed Throttle and Idle Actua-
tor Reset under the Settings/ECM tab.
14. Program the vehicle ignition keys into the new
ECM
vmr2015-129