Engine Oil - BRP can-am RENEGADE 500 2015 Operator's Manual

Table of Contents

Advertisement

219700340
AIR FILTER OIL (P/N 219 700 340)
vbs2009-012-014
TYPICAL - OIL THE FOAM FILTER
2. Let stand for 3 to 5 minutes.
3. Remove any excess of oil that
could transfer to the paper filter by
wrapping the foam filter into an ab-
sorbent cloth and squeezing gently.
This will also ensure a full oil cover-
age on foam filter.
Air Filter Installation
Reinstall oiled foam filter on paper air
filter.
Slightly grease O-ring seal and plastic
body of air filter.
Install air filter as the reverse of re-
moval.
Ensure air filter cover is properly locked
onto the air filter housing. See indica-
tions on filter cover and housing.
vmr2012-005-001_a
1. Cover position arrow
2. Locked
3. Unlocked
Install console as the reverse of re-
moval. However, pay attention to the
following.
Align and insert studs with grommets
on rear portion of console until studs
engage with grommets.
vmo2014-010-003_a
1. Console
2. Studs and grommets
Reinstall the seat.

Engine Oil

Engine Oil Level
NOTICE
and refill if necessary. Do not over-
fill. Operating the engine/gearbox
with an improper level may severely
damage engine/gearbox. Wipe off
any spillage.
_______________
MAINTENANCE PROCEDURES
Check level frequently
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am renegade 800r 2015Can-am renegade 1000 2015

Table of Contents