Sprag Clutch - BRP Cam-am Outlander 6x6 DPS 2015 Manual

tmr2011-012-008_a
1. Crankshaft (MAG side)
2. Oil passage
3. Threads
Oil sprag clutch and install sprag clutch gear.
vmr2006-041-015_b

1. Sprag clutch

2. Sprag clutch housing
3. Sprag clutch gear
4. Apply engine oil here
Slide rotor onto crankshaft. The woodruff key and
the keyway must be aligned.
Rotate starter double gear counterclockwise to
align intermediate gear teeth with sprag clutch
gear.
vmr2015-116
Section 02 ENGINE, CVT AND GEARBOX
Subsection 07 (MAGNETO AND STARTER)
vmr2006-041-012_b
1. Starter double gear
2. Sprag clutch gear
3. Intermediate gear
ROTOR RETAINING SCREW
Service product
Tightening torque
SPRAG CLUTCH
Sprag Clutch Removal
Remove MAGNETO COVER
this subsection.
Heat screws in order to break the Loctite.
Loosen sprag clutch housing screws located in-
side rotor.
tmr2011-012-004_a
1. Rotor
2. Sprag clutch housing screws
Remove rotor (refer to
Remove sprag clutch gear.
Remove sprag clutch housing screws and sprag
clutch housing.
LOCTITE 648 (GREEN)
(P/N 413 711 400)
150 N•m ± 10 N•m
(111 lbf•ft ± 7 lbf•ft)
. See procedure in
ROTOR
in this subsection).
145