BRP Cam-am Outlander 6x6 DPS 2015 Manual page 293

3. Disconnect the following from the fuel pump:
– Fuel pump electric connector
– Fuel system vent hose
– Fuel pump pressure hose.
vmr2015-130-005_a
1. Fuel pump connector
2. Vent hose
3. High pressure fuel hose
4. Remove fuel pump retaining nut.
WARNING
Fuel vapors are flammable and explosive un-
der certain conditions. Use only non-spark-
ing tools.
CAUTION Replace
whenever fuel pump retaining nut is loosened.
REQUIRED TOOL
FUEL PUMP NUT TOOL
(P/N 529 035 899)
vmr2015-130
Subsection 02 (FUEL TANK AND FUEL PUMP)
fuel pump gasket
Section 04 FUEL SYSTEM
vmr2012-028-026_a
FUEL PUMP REMOVAL
1. Fuel pump retaining nut
5. Carefully pull out and rotate fuel pump as re-
quired.
NOTICE
Pay attention not to damage fuel
sender and fuel pump prefilter.
vmr2012-028-027_a
1. Approximate float orientation
2. Approximate prefilter orientation
6. Discard gasket ring.
7. Wipe off any fuel spillage.
Fuel Pump Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Rotate fuel pump during insertion as per removal
procedure.
CAUTION Pay attention not to damage
fuel sender and fuel pump prefilter.
1. Install a NEW gasket ring.
401