Section 05 ELECTRICAL SYSTEM
Subsection 07 (LIGHTS, GAUGE AND ACCESSORIES)
Winch Switch Circuit Protection
CONDITION
Supplied when
accessories relay
activated
Winch Removal
1. Disconnect, the battery BLACK (-) cable first,
then the RED (+) cable.
WARNING
Always respect this order for disassembly;
disconnect BLACK (-) cable first.
2. Remove the hook.
2.1 Remove and discard the cotter pin.
2.2 Remove the hook pin.
tsi2011-004-009_a
1. Hook
2. Hook pin
3. Cotter pin
3. Remove the winch cable fairlead.
460
CIRCUIT PROTECTION
Fuse 7 of fuse block
1 (from accessories
relay R3)
vmr2015-137-001_a
4. Remove the front skid plate.
vmr2015-137-002_a
5. Disconnect both winch power cables.
NOTE: Note the position of the power cables for
reinstallation.
vmr2012-035-010_a
1. Winch power cables
6. Remove the four winch retaining screws from
the front bumper support.
vmr2015-137