BRP Cam-am Outlander 6x6 DPS 2015 Manual page 333

Section 05 ELECTRICAL SYSTEM
Subsection 05 (STARTING SYSTEM)
vmr2015-048-003_d
PROBE PROBE
SS1 SS2
If resistance is not as per specification, replace the
solenoid.
3. Disconnect BP1 and BP2.
vmr2015-048-007_a
PROBE PROBE
Terminal to
BP3
starter motor
4. Jump starter solenoid.
444
SPECIFICATION
@ 20°C (68°F)
vmr2015-048-009_a
SS1 IS ON THE RIGHT
Close to 6
Terminal from
If resistance is not as per specification, replace the
solenoid.
5. If starter power and ground circuits are good,
refer to
for starter diagnosis and replacement.
Solenoid Diode Test
SPECIFICATION
O.L.
vmr2015-048-013_a
Disconnect SS1 and SS2 from starter solenoid.
vmr2015-048-012_a
1. SS1
PROBE PROBE
Terminal to
battery starter motor
MAGNETO AND STARTER
SS2-
SPECIFICATION
Close to 0
subsection
SS1-
vmr2015-135