Timing Chain Inspection - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Section 02 ENGINE, CVT AND GEARBOX
Subsection 11 (TIMING CHAIN (650))
3. Refer to following procedures in this subsection
and remove following parts:
– Chain tensioner
– Camshaft timing gear.
4. Remove timing chain guide (tensioner side) and
lower timing chain guide.
Vmr2012-016-005_a
1. Timing chain
2. Lower timing chain guide
3. Timing chain guide (tensioner side)
NOTE: Mark the operating direction of the timing
chain and check for excessive radial play before

TIMING CHAIN INSPECTION

removal. Refer to
5. Carefully pull the timing chain downwards and
sideways, then out of the crankcase.
Timing Chain Removal (PTO Side)
1. Refer to BOTTOM END
following parts:
– PTO cover
– Breather gear
– Intermediate gear.
TOP END
2. Refer to subsection and remove fol-
lowing part:
– Valve cover.
3. Refer to applicable procedures in this subsec-
tion and remove following parts:
– Chain tensioner
– Camshaft timing gear.
4. Remove timing chain guide (tensioner side) and
lower timing chain guide.
210
.
subsection and remove
tmr2011-045-015_a
1. Timing chain
2. Lower timing chain guide
3. Timing chain guide (tensioner side)
NOTE: Mark the operating direction of the timing
chain and check for excessive radial play before
TIMING CHAIN INSPECTION
removal. Refer to
5. Carefully pull the timing chain sideward and
down from the crankcase.
Timing Chain Inspection
Inspection is the same for both timing chains.
Check timing chain on camshaft timing gear for
excessive radial play.
tmr2011-045-003_d
CHECKING TIMING CHAIN RADIAL PLAY
Check chain condition for wear and teeth condi-
tion.
.
vmr2015-152