BRP Cam-am Outlander 6x6 DPS 2015 Manual page 414

vmr2010-003-023_a
TYPICAL
1. Pitman arm
2. Tie rod ends inserted in pitman arm
3. Hardened steel washer on tie rod end
9. Install the lower half bushing retainer loosely
using NEW fasteners.
vmr2012-039-021_a
1. Lower half bushing retainer
2. Hexagonal forming screws installed loosely
10. Install steering column pinch bolt and a NEW
elastic nut loosely.
11. Tighten the steering and DPS fasteners to
specified torque using the torque sequence
specified in the following 3 illustrations.
TIGHTENING TORQUE
DPS retaining screws
DPS bracket retaining
screws
Steering column retainer
Steering column pinch bolt
vmr2015-142
Subsection 03 (DYNAMIC POWER STEERING (DPS))
24.5 N•m ± 3.5 N•m
(18 lbf•ft ± 3 lbf•ft)
Section 07 CHASSIS
4
1
6
8
2
vmr2012-039-100_a
DPS AND STEERING TORQUE SEQUENCE (1 OF 3)
vmr2012-039-101_a
DPS AND STEERING TORQUE SEQUENCE (2 OF 3)
5
7
9
3
10
12
529