BRP Cam-am Outlander 6x6 DPS 2015 Manual page 318

Table of Contents

Never weld the wire to the terminal.

Welding can change the property of the wire

and it can become brittle and break.

Install the protective heat shrink rubber tube on

the terminal. Heat the heat shrink rubber tube us-

ing the heat gun so that it grasps the wire and the

Make sure that the protective heat

shrink rubber tube has been properly installed

and no part of wire is exposed.

Section 05 ELECTRICAL SYSTEM

Subsection 02 (WIRING HARNESS AND CONNECTORS)

Troubleshooting