Valve Springs - BRP Cam-am Outlander 6x6 DPS 2015 Manual

Section 02 ENGINE, CVT AND GEARBOX
Subsection 09 (TOP END (650))
tmr2011-013-011_d
1. M6 Screws
M6 CYLINDER HEAD SCREWS
TIGHTENING
TORQUE
Check timing chain guide (tensioner side) for
movement.

VALVE SPRINGS

Valve Spring Removal
Refer to following procedures in this subsection
to remove:
– CAMSHAFT
CYLINDER HEAD
– .
Remove valve spring.
REQUIRED TOOL
VALVE SPRING COMPRESSOR
(P/N 529 035 724)
VALVE SPRING COMPRESSOR
CUP (P/N 529 035 764)
WARNING
Always wear safety glasses when disassem-
bling valve springs. Be careful when unlock-
ing valves. Components could fly away be-
cause of the strong spring preload.
166
10 N•m ± 1 N•m
(89 lbf•in ± 9 lbf•in)
R400motr79A
LOCATE VALVE SPRING COMPRESSOR CLAMP IN CENTER OF
THE VALVE
Remove valve cotters.
1 3
R400motr78A
1. Valve spring compressor clamp
2. Valve spring compressor cup
3. Valve cotter
Remove tools and withdraw valve spring retainer
and valve spring.
tmr2011-013-015_a
1. Valve spring retainer
2. Valve spring
2
vmr2015-117