BRP Cam-am Outlander 6x6 DPS 2015 Manual page 8

TIGHTENING TORQUE
Tighten fasteners to the torque specified in the exploded view(s) and/or in the written procedure. When
a torque is not specified, refer to the following table.
Torque wrench tightening specifications must be strictly adhered to.
Locking devices must be replaced when removed (e.g.: locking tabs, elastic stop nuts, self-lock-
ing fasteners, cotter pins, etc.).
In order to avoid a poor assembly, tighten screws, bolts, or nuts in accordance with the following proce-
dure:
1. Manually screw in all screws, bolts and/or nuts.
2. Apply half the recommended torque value.
3. Tighten fastener to the recommended torque value.
NOTICE
Be sure to use the recommended tightening torque for the specified fastener used.
NOTE: Whenever possible, always apply torque on the nut.
NOTE: Always torque screws, bolts and/or nuts using a crisscross pattern when multiple fasteners are
used to secure a part (eg. a cylinder head). Some parts must be torqued according to a specific sequence
and torque pattern as detailed in the installation procedure.
4.8
Property
class and
head
markings
5
Property
class and
nut
markings
A00A8BS
FASTENER
SIZE
5.8 Grade
1.5 – 2 N•m
M4
(13 – 18 lbf•in)
3 – 3.5 N•m
M5
(27 – 31 lbf•ft)
6.5 – 8.5 N•m
M6
(58 – 75 lbf•ft)
M8 15 N•m (133 lbf•in)
M10 29 N•m (21 lbf•ft)
M12 52 N•m (38 lbf•ft)
M14 85 N•m (63 lbf•ft)
vmr2013-002
WARNING
8.8 9.8
4.8 8.8 9.8
4.8 8.8 9.8
8
FASTENER GRADE/TORQUE
8.8 Grade
2.5 – 3 N•m
(22 – 27 lbf•in)
4.5 – 5.5 N•m
(40 – 47 lbf•ft)
8 – 12 N•m
(71 – 106 lbf•ft)
25 N•m (18 lbf•ft)
48 N•m (35 lbf•ft)
85 N•m (63 lbf•ft)
135 N•m (100 lbf•ft)
INTRODUCTION
10.9
10.9
10.9
10
10.9 Grade
3.5 – 4 N•m
(31 – 35 lbf•ft)
7 – 8.5 N•m
(62 – 75 lbf•ft)
10.5 – 15 N•m
16 N•m (142 lbf•in)
(93 – 133 lbf•in)
32 N•m (24 lbf•ft)
61 N•m (45 lbf•ft)
105 N•m (77 lbf•ft) 128 N•m (94 lbf•ft)
170 N•m (125 lbf•ft) 200 N•m (148 lbf•ft)
12.9
12.9
12.9 12.9
12
12.9 Grade
4 – 5 N•m
(35 – 44 lbf•ft)
8 – 10 N•m
(71 – 89 lbf•ft)
40 N•m (30 lbf•ft)
73 N•m (54 lbf•ft)
XVII